Prev

Line Sensor and Mount

Next
Here's the line sensor that I'm using (one on each side - also from the Mark III Store). It was intended to be used as a micro-sumo line sensor, but I used one on each side. I just had to file down the sides a wee bit to get it to fit. The mount was machined from Delrin. I was originally going to put two slots for mounting, but realized that I only needed one in the center. This allows the distance from the sensor to the ring to be adjusted. Smaller...
Prev Index Next

Home - Line Maze 2006 - Index

Copyright 2010 by Dave Hylands